New Product ~ NDR-240/480 Series (240W/480W DIN Rail Power Supply with PFC)

▣ Introduction

The slim economical DIN rail power supplies NDR-75/120 from Mean Well have received outstanding feedback since they were released to the market in 2014. In order to further fulfill the demands for higher output wattage from the industrial control field, Mean Well extends the power up, launching~NDR-240(240W)/480(480W) series. These two series feature the low width of the power body, 63mm and 85.5mm, respectively, which resolves the issue of the limited space on the rail for system designers. Furthermore, compared to the previous generation DRP-240/480 series, the volume of NDR-240/480 is lowered by 43% and 51.6%, respectively, that NDR-240/480 will be the best choices for terminal cabinets with limited internal rail spacing. Suitable applications include industrial control system, factory automation, electro-mechanical apparatus, etc.


▣ Feature

• Can be installed on DIN rail TS-35/7.5 or TS-35/15

• 90~264VAC input

• Built-in active power factor correction function (PFC)

• High efficiency up to 92.5%

• Fanless design, cooling by free air convection

• Working temperature：-20~+70℃

• Protections：Short circuit / Overload (constant current limiting) / Over voltage / Over temperature

• Comply with EN61000-6-2(EN50082-2) industrial immunity level

• Approvals：UL508/TUV/CB/CE

• Dimension (W x H x D)： NDR-240：63 x 125.2 x 113.5 mm; NDR-480：85.5 x 125.2 x 128.5 mm

• 3 years warranty